Investigating the claims of Andrei Melnichenko
Andrey Melnichenko *.pdf
Andrei Melnichenko Inventions
FREE GENERATION AS THE WORLD'S MOST SUPER-TECHNOLOGY IN THE WORLD ELECTRIC POWER OF
THE FUTURE. AND AS IN ENERGETICS AND ELECTRICAL ENGINEERING, VERY GRANDLY BROUGHT OVER
100 YEARS ...
FREE GENERATION AND FREE ELECTRIC ENERGY IS JUST AS A CROWN ...
FREE GENERATION AND COIL MELNICHENKO FOR IMPLEMENTATION. GAP WITH THE COVER OF ALL
ENERGY AND ELECTRICAL ENGINEERING PATTERNS !!!
FREE GENERATION AND CONSTRUCTION OF A SIMPLIFIED AUTONOMOUS POWER STATION. MAGNETIC
ENERGY "SAMOSAPIT" SCHEME.
FREE GENERATION AND WORLD REVOLUTION IN ENERGY.
FREE GENERATION AND GENERAL BASIC PRINCIPLES AND PRINCIPLE CONSTRUCTION SCHEMES FOR
ALL AUTONOMOUS ENERGY POWER PLANTS AND UNINTERRUPTED POWER SOURCES
OPENING
Open the effect of electricity generation on the basis
of Faraday's electromagnetic induction. It allows through the use of ferromagnetic
materials and a special magnetic field topology in the system to receive the excess
energy of the magnetic field and convert it into usable electricity in unlimited
amounts. Since 1831 a. Michael Faraday discovered the law of electromagnetic
induction, no significant additions have been made to it. In particular, all the
magnetic fields of magnetic circuits considered rigidly connected with wires like a
simply connected system. For example, in the simplest case, the magnetization of
ferromagnetic thought that everything is linked to the current magnetic circuit,
winding magnetization. However, in the simplest case, a magnetic circuit consisting of
two or three ferromagnetic volumes separated by nonmagnetic gap may occur magnetic
fields do not form a flux coil magnetization is closed loop with current.
The
theory of operation of electrical current source (electricity) to create a magnetic
field is determined by the energy of the magnetic field through the coils of the
magnetizing coil, plus the loss in the wires and hardware. The work of the current
source is determined by the formula:
Eventually the work of the current source,
the cost of electricity to create a magnetic field in the magnetic circuit is equal to
the energy of the magnetic field through the coil with current. Thus, the energy of
the magnetic field system, which is shorted out the turns of the magnetizing coil does
not affect the setting of current in the coil and does not require for their formation
cost of electricity from the power source, battery, generator, and so forth.
For example, if we magnetize the iron (ferromagnetic) bar and next arrange another by
separating it with a small air gap, the second bar magnet and magnetized, but apart
from the total magnetic field arises around the bars of the second bar their magnetic
field only closed around him and does not participate in the magnetic interaction
between the two ferromagnetic volume. This magnetic field I called secondary. This
field has no connection with the inductive coil magnetization in the first iron bar,
and most importantly does not require on their education no electricity from the
magnetization power supply. The secondary magnetic field has a certain energy which
can be converted into useful energy. To do this, when demagnetization (turned off,
decreases the current in the coil on the ground rod) on the second ferromagnetic
volume (rod, bar) is removable special winding, which is connected to the load only
when the demagnetization (not involved in the magnetization). Thus, all of the energy
of the secondary magnetic field can be transformed into a series of additional useful
energy.
The amount of iron (ferromagnetic) rods in the magnetic circuit can be
infinite, under certain conditions. In some ferromagnetic means magnetic interactions
can be extended to infinity. For example, domains turn in magnetodielectrics,
fluctuations elektromagnitikov powders of ferromagnetic material.
In such
systems, most of the energy of the magnetic field of the magnetic circuit has no
direct connection with the inductive magnetizing source. There is a huge amount of
magnetic circuits, where you can get a secondary magnetic field, magnetizing coil is
closed. This secondary magnetic energy can be used to generate electricity. Dozens of
devices for the generation of electricity on the pulse and alternating current,
including directly sinusoidal current at power frequency: 50: 60Hz. It is sufficient
to conventional transformer iron wires and power electronics components.
Outdoor physical effect of energy generation, I as the author called Transgeneratsiey
electricity. Effect brilliantly confirmed in a simple experiment, and has been
thoroughly studied in the research on different types of ferromagnetic materials and
magnetic circuits.
Now there is the international patenting of inventions based
on this effect in many countries. Patented a method of power generation and a number
of devices based on this method.
From the point of view of theoretical physics
the effect of generation is possible due to the special nature of quantum
ferromagentikov. The magnetic field is formed by the electron spin - magnetic moments
of electrons. Unlike conventional electron currents in the wires back absolutely not
responsive to the so-called zero inductive impedance (resistance). When magnetized to
it only needs to exert a magnetic field, not the electric power in the coils with
electric current. In magnetic systems with a secondary magnetic field arises
(generated by) the additional energy of the magnetic field, which can be easily
converted into additional useful energy in its purest form.
In systems with a
secondary magnetic field, there is also a secondary electric field together form a
vector Poynting energy flow directed into the ferromagnetic volume from the
surrounding physical continuum, rather than from the magnetization coil wires.
Transgeneratsiya electricity can generate clean electricity from ferromagnets in
unlimited quantities. Ferromagnet plays the role of the quantum of the electromagnetic
pump pumping energy from the physical continuum and converts it due to the Faraday
effect in electricity.
Andrey Melnichenko videos
Andrey Melnichenko - Ferromagnetic free energy generation (1:51).
GLED 2 (4:19)
Andrey Melnichenko - Ferromagnetic Free Energy Generation - up to 150% Efficient..
(22:33)
Melnichenko - November_1996 (3:53)
Andrey Melnichenko - Youtube Videos.
I have tested Andrei Melnichenko idea of using three coils DR 2109-E
as an input and one coil DR 2109-E as the output. The coils measure 30 mm long with an
inside diameter of 10 mm. I used a 140mm long and 10 mm diameter ferrite rod. The
output was decreasing with the distance of the output coil from the input coils.
First, I connected three input coils in serie. They measured a total
inductance of 5 mH 43 and a total resistance of 15 ohm 1. The input voltage was 1
volt 5. The output coil measured an inductance of 0 mH 737 and a resistance of 5 ohm
1. The maximum resonance voltage with a 27 kohm load was 1 volt.
Second, I
connected three input coils in parallel. The measured total inductance was 0 mH 588
and the total resistance was 2 ohm 4. The input voltage was 1 volt 5. The output coil
measuered a total inductance of 0 mh 850 and the resistance was 5 ohm 8. The output
voltage with a 27 kohm load was only 0 volt 2 at maximum frequency. One thing that I
noticed with three input coils in parallel was that the output voltage increased with
frequency using sine wave. My build in frequency generator has a variable output level
and a frequency range between 1 Hz - 1 Mhz.
Conclusion: I used a
variable resistor to find out the resistance when the output decreased to half,
compared to unloaded condition. It was strange that the parallel coils that was using
more input power, because less inductance and resistance, compared to serial coils.
Did not increase the output power. Instead the output was less with the three
input coils in parallel, than in serie.
A possibility to make a free energy
motor is to use high voltage pulsed direct current so the ampere through the repelling
serial high inductance coils will be high. Then the output power will be great with a
lesser input power like
Edwin V. Gray motor.
In theory one can make a solid state version by adding
a condenser for serial resonance to the output coil. While using many turns and high
voltage for large current to the input coil.
- Hermes Atar Trismegistus
Andrey
Melnichenko is another great inventor and has several patents on the effect he found.
On his Utube channel he made countless videos to demonstrate the effect he found.
Chris has made several demonstrations to allow everyone to better understand
the different effects of Andrey Melnichenko's research and I would like to make it a
study and continuity of his thread.
When doing various searches on the web it
is very rare to find those who have managed to make a replica of its effect. To study
the phenomenon take the very simple diagram from the website of A. Melnichenko.
This schematic has two coils L1 and L2 in mutual connection and as
can be noted the same phase polarity (dot). To understand what is happening in the
coils, an analysis of the polarities is necessary.
As Melnichenko himself
explains there are two phases to take into consideration, the 1st magnetization and
the 2nd demagnetization.
1 When magnetizing, T1 closes and L1 becomes negative
on the bottom and positive on the top with the same phase polarities on L2. D1 and D2
being in reverse polarity then X1 and X2 do not light up.
2 During demagnetization, T1 opens causing L1 and L2 to reverse
polarity as shown in the following diagram:
Since D1 and D2 are now forward biased then both diodes conduct so
that X1 and X2 turn on.
Practical experience will follow to demonstrate if this
is indeed what is happening.
Jagau
For those who want to build I
use this concept
3 coils,
coils number 1 is transmitter and two other coils
are receiver
Jagau
My
experiments on this phenomenon are at the beginning and I believe to have good results.
To your first question: Is it possible to make Lenz Law non-existing,
I believe melnicehnko solved some of this problem by making a nonlinear transformer
this way:
The primary is air core and the secondary is ferromagnetic, nothing
new yet but with an air gap between the two the output does not affect the input.
I would explain the Melnichenko or Hubbard effect this way:
Lenz's law
is almost non-existent or negligible because we use this type of non-linear
transformer arrangement as there is no load connected to the secondary (idle).
The load is only connected in the demagnetization phase to the secondary.
As for the numbers of turns of wire P and S, these are standard calculations.
Hubbard did the same thing with his different gaps between the coils so he
thwarted Lenz's law. Read this you will understand what I mean in the principle of
Hubbard and Melnichenko
https://www.physicsclassroom.com/class/waves/Lesson-2/Energy-Transport-and-the-Amplitude-of-a-Wave
For your other questions on Lenz's law, I invite you to follow this demo by
Professor Walter Levine from MIT, you will have your answers well explained
https://www.youtube.com/watch?v=nGQbA2jwkWI
Jagau
back to linkpage
suggestion
read and sign my guestbook