MRA = Magnetic Resonance Amplifier
Joel McCLAIN & Norman WOOTAN The Magnetic Resonance Amplifier
Joel McCLAIN & Norman WOOTAN Magnetic Magnetic Resonance Amplifier
[ KeelyNet Message Collection # 2 ]
Electrical Operation of Piezo Actuators
Parametric oscillator
Step response
Youtube - Norman's MRA device
Youtube - Faraday Research...MRA Device Build
Dan A. Davidson Acoustic-Magnetic Power Generator USP 5,568,005
Hi Drew
Just be careful when using regular amplifiers to deliver standing wave
power as the standing wave easily overheats the output stage. When current goes back
into the output transistors the power bus voltage increases (assuming power MOSFETs
with their parasitic source-drain diode). When current enters in revers into the
output with voltage out of phase there will be great power dissipation in the output
transistors.
A solution could be modern multilevel inverters. But they probably
won't deliver the wanted frequency. Search for something capable of working with four
quadrant power. This will be able to both deliver and consume power. This is working
with both positive and negative voltage as well as positive and negative current in
all combinations to have bidirectional power.
Just ask Norman about the result
of driving reactive loads with an amplifier.
Power supply pumping;
https://www.infineon.com/dgdl/an-1071.pdf page 12.
Bipolar power supply:
https://www.matsusada.com/column/bipolar_basic.html.
Regards
Ole
Hi Norman
Would there be an electric standing wave in the
neutral/ground wire? I remember Steven Mark explaining the idea of how he started his
research to make his TPU (toroidal power unit). His idea was from the kick in the
heating filament of tubes when switching on in old computers. The filament received a
kick from Earth's magnetic field each time it was turned on. This wore down the
filament faster than just leaving it turned on. See this:
https://www.diyaudio.com/community/threads/starved-filaments-sound-good-why.383282/post-6946602.
Was there this big current to kick apart the filament? The wires must have
been swept by a magnetic field or perhaps by the motional electric field to make this
current.
Regards
Ole
Drew!
That was "Tandy Corp",
Radio Shack warranty repair center, Ft. Worth.
The Standing Columer Wave is created
around the MRA when run for a long time. When the ground side connection was broken,
the wave would collapse and blow the filaments in near by light bulbs that are in
lamps not turned on but with a ground connected. "I later called this phenomenon
"Neutral Spike", earth response to "Floating charge" in space.
Joel's wife got
tired of replacing bulbs.
Just "weird shit" around MRA at resonance!
After
studying the Antiparallel Magnetic Flux Annihilation/ Reconnect event, determined that
this occurs in the "peak resonance" ultra high "Q" region of Universal Resonance
Curve. Antiparallel flux lines annihillation.
See:
https://www.physics.ucla.edu/plasma-exp/research/MagFieldAnnihilation/index.html
https://www.physics.ucla.edu/plasma-exp/research/NonLinVortices/index.html
Hope this will help you!
Norm
back to linkpage
suggestion
read and sign my guestbook